Accu AXIOM Product Line Manual Download Page 72

Page: 72 / 230

72 Setup

AXIOM

™

/ AXIOM-X

™

Product Line Manual

Accu-Sort Systems, Inc.

05-AXIOM-AXIOM-X_Setup_R10.doc

To open a communication port:

1. Click

the

Open Port

button.

2. Once the reader connection is complete, the message “

Connected by

serial cable”

appears in the status line.

3. The

Connection

window displays the

Reader’s Information

. The type

of AXIOM (1L, 2L, 4L) or AXIOM-X (2L, 4L) is identified in the Reader
model line.

Connection – Open Port

4. If a connection is not made,

“No reply received from AXIOM”

message

is displayed.

5. Check the cable connection between the reader and computer to assure

proper connection, and then click

Open Port

Reader’s Information Buttons

Button Definition

Save

Saves the reader information to scan head.

Retrieve

Retrieves the reader information from scan head.

Default

Returns the reader configuration to the default settings.

NOTE:

Selecting Default will return your reader to the default factory

settings. Since your AXIOM may have been pre-configured for your
application at the factory, it is recommended that you ALWAYS save your
reader parameters to disk before using the default function.

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands