Accu AXIOM, Product Line Manual

Page: 147 / 230

AXIOM
™
/ AXIOM-X
™
Product Line Manual
Troubleshooting 147
08-AXIOM-AXIOM-X_Troubleshooting_R10.doc Accu-Sort Systems, Inc.
Log Viewer
The Diagnostics > Log Viewer lets you review the performance logs saved
by the AXIOM. The log view field remains empty until you select one of the
three most common logs (Read Rate, System Counters, or Message Log)
via the buttons or enter a log request in the Command field.
NOTE:
Use the Tools > Save LogView to File menu selection to save the
on-screen log view information to a file on your PC. This is useful if you
need to archive or review the log information at a later time.
Log Viewer Commands
There are several commands that you can use to display AXIOM parameters
and diagnostic information. Commands can be sent from the Command field
on the log viewer. Commands may also be sent from a terminal interface,
such as a TELNET connection to the AXIOM.
Display
Commands Description
DISP COUNTERS Display the System Counter log view.
DISP ENET Display the Ethernet interface status including MAC address.
DISP LASERS Display ALL Lasers log view.
DISP LASERx Display one Laser log view, where X is 1 – 4.
DISP MSGLOG Display the Message log view.
DISP READRATE
Display the Read Rate log view.
Other Commands Description
CLEAR ALL Clears all information from the Message Monitor.
NOTE:
All commands can be issued from the Command field. However,
when entering a command in the field, spaces are NOT permitted. As a
result, the display commands need to be entered without a space (i.e.,
DISPCOUNTERS, DISPMSGLOG, etc.)
NOTE:
Right-click on log view provides two options: Save LogView to File
(also available from Tools) and Copy to Clipboard .