Accu AXIOM Product Line Manual Download Page 110

Page: 110 / 230

110 Setup

AXIOM

™

/ AXIOM-X

™

Product Line Manual

Accu-Sort Systems, Inc.

05-AXIOM-AXIOM-X_Setup_R10.doc

Tools

The Tools menu offers the following functions:

Tools Menu Descriptions

Selection Definition

Compare Parameters

Compares two sets of operational parameters.

(See Comparing Parameters.)

Backup AXIOM
Parameters to Base

Sends parameters the AXIOM scan head is using to the
wiring base to which it is connected.

Restore AXIOM
Parameters from Base

Send the parameters stored in the wiring base to the
AXIOM scan head to which it is connected.

Visual Keyboard

Use the visual keyboard to save keystrokes while
creating messages that use non-printable ASCII
characters (e.g.: STX, CR, LF).

Reboot AXIOM – Use to reboot/restart the AXIOM
reader.
Test Mode On – Enables the reader’s test mode.

AXIOM Commands

Test Mode Off – Disables the reader’s test mode.

Save LogView to File

Use to save the on-screen LogView information (from

Diagnostics > Log Viewer

) to a file on your computer.

(See Chapter 8.)

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands