Accu AXIOM Product Line Manual Download Page 28

Page: 28 / 230

28 Mechanical

Installation

AXIOM

™

/ AXIOM-X

™

Product Line Manual

Accu-Sort Systems, Inc.

03-AXIOM-AXIOM-X_Mechanical_Installation_R10.doc

Mount wiring bases to XMB:

1. Attach XMB (1) to mounting structure with the provided hardware (2).

2. Mount both wiring bases (3) to the XMB.

Use the three screws (4) provided with each wiring base.

3. Insert the screws through the XMB into the threaded holes on bottom of

wiring base. DO NOT over-tighten screws.

4. Continue with mounting the power supply to the XMB.

(See page 29.)

IMPORTANT:

Do not install scan heads to wiring bases until all wiring is

completed.

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands