Accu AXIOM Product Line Manual Download Page 136

Page: 136 / 230

136

Maintenance

AXIOM

™

/ AXIOM-X

™

Product Line Manual

Accu-Sort Systems, Inc.

07-AXIOM-AXIOM-X_Maintenance_R10.doc

Cleaning the Tachometer

If your application uses the tachometer option for tracking purposes, be sure
to clean the tachometer wheels periodically as outlined below.

1. Turn off the product transport.

2. Turn off the reader’s lasers.

(See Laser Shutoff.)

3. Using a clean, soft cloth, wipe the wheels of the tachometer clean using

a mild detergent solution.

4. Before restarting the system, be sure the tachometer is making good

contact with the product transport.

5. Verify tachometer operation.

Verify Tachometer Operation

There are two ways to verify tachometer operations.

Use AXCESS Setup Software

1. Connect reader to a computer.

1. Start the AXCESS setup software.

2. Go

Diagnostics > AXIOM Monitor

3. Verify

the

Belt Speed

is accurate when the conveyor is running.

Use Tach LED in Wiring Base

1. Remove the scan head from the wiring base.

Slowly spin the tachometer wheel while verifying the tach LED in the
wiring base is flashing.

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands