Accu AXIOM Product Line Manual Download Page 119

Page: 119 / 230

AXIOM

™

/ AXIOM-X

™

Product Line Manual

Operations

119

06-AXIOM-AXIOM-X_Operations_R10.doc

Accu-Sort Systems, Inc.

6. Using the programming setup cable, connect your PC to the setup

connector on the wiring base. You may also connect via a network.

7. Run the AXCESS setup software and establish a connection with the

reader.

8. Using AXCESS Explorer, go to the

Diagnostics > AXIOM Monitor

9. During operations, use the

AXIOM Monitor

to confirm the reader’s

status, read quality, code quality, and messages via the on-screen
indicators.

(See Chapter 8, Diagnostics.)

10. Close the connection to the reader.

11. Disconnect setup cable.

Operations Checklist

Check trigger photoeye LED for proper operation.

Test parameters to assure optimal operation.

Observe the reader’s Status Indicator LEDs during power-up.

(What to watch for is outlined later in this chapter.)

Using AXCESS Explorer, select

Diagnostics > AXIOM Monitor

(See Chapter 5.)

Pass test label in scanning beam.

Adjust mounting as needed for optimal performance.

Modify parameters as needed for optimal performance.

Save parameters to scan head.

Backup parameters from scan head to wiring base.

Backup parameters to disk (optional, but recommended).

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands