Accu AXIOM Product Line Manual Download Page 36

Page: 36 / 230

36 Mechanical

Installation

AXIOM

™

/ AXIOM-X

™

Product Line Manual

Accu-Sort Systems, Inc.

03-AXIOM-AXIOM-X_Mechanical_Installation_R10.doc

Check Scan Head Excessive Shock Indicator

IMPORTANT:

AXIOM / AXIOM-X scan heads may have been equipped

with an excessive shock indicator. The purpose of this indicator is to assure
that scan heads that have experienced

shock in excess of 75G

are not

installed at product scan points.

To check the shock indicator before installation:

1. Locate the shock indicator.

AXIOM Scan Head

Shock Indicator Location

AXIOM-X Scan Head

Shock Indicator Location

2. Confirm if there has been any excessive shock.

GOOD Indicator

(no shock, good to install)

BAD Indicator

(excessive shock, DO NOT install!)

3. If the indicator is

GOOD

, the scan head can be installed.

4. If the indicator is

BAD

, the scan head has experienced excessive shock.

DO NOT install the scan head.

IMPORTANT:

Contact Accu-Sort’s Customer Service department at

1-800-BAR-CODE as soon as possible.

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands