Accu AXIOM Product Line Manual Download Page 208

Page: 208 / 230

208 Appendices

AXIOM

™

/ AXIOM-X

™

Product Line Manual

Accu-Sort Systems, Inc.

A1-AXIOM-AXIOM-X_Appendices_R10.doc

Modify > Configuration Options for using FAST Monitor

Enter the

FAST Monitor Configuration

menu selection.

For controller or standalone units, set the following parameters:

Set a

Tunnel Name

of up to 15 alphanumeric characters.

This name is used in all FAST Monitor messages (bracketed by
<MsgSource> name </MsgSource>).

Set

Unit Position

by clicking on the appropriate AXIOM unit in the tunnel

picture and setting a number. The numeric display is for informational
purposes only. Each unit in the tunnel must have a unique position, which is
used in all FAST Monitor messaging.

The following

Net Host Port2

settings are programmable:

Port

Number

Reconnect

Time

Remote IP Address (of FAST Monitor server)

NOTE:

AXCESS forces FAST Monitor to use Net Host Port2. If Ethernet

host communications are required, you must use Net Host Port1.

For client units, set the Unit Position as described above.

Summary of Contents for AXIOM







































































































































































































































Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands

Accu AXIOM, Product Line Manual

Search results

Summary of Contents for AXIOM

Reviews:

Related manuals for AXIOM

Brands by name

Popular brands