manualshive.com logo in svg

Accu AXIOM, Product Line Manual

Introducing Accu AXIOM, the ultimate Product Line Manual offering comprehensive guidance for every user. Download this invaluable manual for free at manualshive.com and unlock a wealth of knowledge to maximize your product experience. Whether troubleshooting or exploring new features, this manual is a must-have resource for all Accu AXIOM owners.

Share
Download
background image

AXIOM

™

 / AXIOM-X

™

 Product Line Manual

 Electrical 

Installation 

51 

 

 

04-AXIOM-AXIOM-X_Electrical_Installation_R10.doc 

Accu-Sort Systems, Inc. 

Power Supply Connections 

 

CAUTION:

 While performing the following wiring connection procedures, 

be sure to follow all safety procedures regarding high-voltage as outlined in 

Chapter 2, Safety

.  No power should be applied to any device until all wiring 

is completed and checked for accuracy. 

 

IMPORTANT:

 All power connections must be quick-disconnect. For 

PERMANENTLY CONNECTED EQUIPMENT (i.e., reader using DC power) 
a readily accessible disconnect device must be incorporated in the building 
installation wiring. For PLUGGABLE EQUIPMENT (i.e., reader using AC 
power supply with non-detachable power cord), the socket-outlet must be 
installed near the reader’s power supply. The outlet must be a readily 
accessible disconnect device. 

 

Using Accu-Sort Power Supplies 

Single Reader 

 The AXIOM readers require 30 watts (maximum) of power. 

Accu-Sort power supply options are available for either domestic or 
international installations and are rated for IP40 and IP65 environments.  

1.  Connect the power supply to the wiring base’s 

INPUT POWER

 terminal 

blocks. The arrow on the figure below indicates the location of the TBs.  

2.  Make sure wiring cannot come loose.  

3.  DO NOT over-tighten screws on terminal blocks. 

4.  The proper location for ground is shown on 

page 47

. 

 

 

 

 

CAUTION:

 The 

INPUT POWER

 wiring table indicates 2.5A output load. 

This is for applications using other power supplies. The Accu-Sort power 
supply can handle an output load of 250mA. 

 

Multiple Readers   

When a multiple reader application uses Accu-Sort 

power supplies, each unit is powered by a separate power supply. DO NOT 
connect power supplies in parallel.  

(See drawing 107481 in Appendix E.) 

AXIOM X-Pattern Applications   

When using two AXIOMs and the X-

pattern mounting bracket (XMB), an Accu-Sort 110W supply is available that 
provides power to both readers. 

(See drawing 107480 in Appendix E.)

 

 

 

Summary of Contents for AXIOM







































































































































































































































Reviews:

No comments

Related manuals for AXIOM

Tanca TL-120 Instruction Manual preview
TL-120
Brand: Tanca Pages: 22
Datalogic Matrix 300N Product Manual preview
Matrix 300N
Brand: Datalogic Pages: 2
Unitech MS860 Bluetooth Quick Start Manual preview
MS860 Bluetooth
Brand: Unitech Pages: 4
Unitech MS910 Manual preview
MS910
Brand: Unitech Pages: 2
Unitech MS842RB User Manual preview
MS842RB
Brand: Unitech Pages: 127
Unitech MS842P Quick Start Manual preview
MS842P
Brand: Unitech Pages: 2
Unitech MS837 Quick Start Manual preview
MS837
Brand: Unitech Pages: 2
Unitech MS840B User Manual preview
MS840B
Brand: Unitech Pages: 63
Feig Electronic ID PAD74-U Installation Manual preview
ID PAD74-U
Brand: Feig Electronic Pages: 15
Metrologic Tire and Rubber Application Sheet preview
Tire and Rubber
Brand: Metrologic Pages: 1
AUDIOLINE UDR300 User Manual preview
UDR300
Brand: AUDIOLINE Pages: 2
Stealth Cam STC-CRV43 Instruction Manual preview
STC-CRV43
Brand: Stealth Cam Pages: 24
NCR RealScan 7883 Installation And Owner'S Manual preview
RealScan 7883
Brand: NCR Pages: 75
Symbol LS1902-T Programming Manual preview
LS1902-T
Brand: Symbol Pages: 9
Hama 91066 Operating Instructions Manual preview
91066
Brand: Hama Pages: 16
ASCOM NUCR-HE Installation Manual preview
NUCR-HE
Brand: ASCOM Pages: 12
Iseo Zero1 Installation Manual preview
Zero1
Brand: Iseo Pages: 2
IDTECK IPK101 User Manual preview
IPK101
Brand: IDTECK Pages: 23

Brands by name

Popular brands

Load more brands