ABB ACQ80, Firmware Manual

Page: 182 / 390

182 Parameters
35.23 Temperature 2
warning limit
Defines the warning limit for temperature
supervision function 2. When measured
temperature 1 exceeds the limit, warning
A492
External temperature 2
is generated.
The unit is selected by parameter
96.16 Unit
selection
.
110 °C or
230 °F
-60…5000 °C or
-76…9032 °F
Warning limit for temperature monitoring
function 2.
1 = 1 unit
35.24 Temperature 2 AI
source
Specifies the analog input when the setting of
35.11 Temperature 1 source
requires
measurement through an analog input.
Not
selected
Not selected None. 0
AI1 actual value Analog input AI1 on the control unit. 1
AI2 actual value Analog input AI2 on the control unit. 2
Other
Source selection (see
Terms and abbreviations
on
page
80
).
-
35.50 Motor ambient
temperature
Defines the ambient temperature of the motor
for the motor thermal protection model.
The unit is selected by parameter
96.16 Unit
selection
. The motor thermal protection model
estimates the motor temperature on the basis of
parameters
35.50
…
35.55
. The motor
temperature increases if it operates in the region
above the load curve, and decreases if it operates
in the region below the load curve.
WARNING! The model cannot protect the
motor if the motor does not cool properly
because of dust, dirt, etc.
20 °C or
68 °F
-60…100 °C or
-76 … 212 °F
Ambient temperature. 1 = 1°
No. Name/Value Description Def/
FbEq16