ABB ACQ80, Firmware Manual

Page: 80 / 390

80 Parameters
Terms and abbreviations
Term Definition
Def
(In the following table, shown on the same row as the
parameter name)
The default value of a
parameter
when used in the ABB
standard macro. For information on other macro-specific
parameter values, see chapter
Control macros
(page
75
).
FbEq16
(In the following table, shown on the same row as the
parameter range, or for each selection)
16-bit fieldbus equivalent: The scaling between the value
shown on the panel and the integer used in communication
when a 16-bit value is selected for transmission to an
external system.
A dash (-) indicates that the parameter is not accessible in
16-bit format.
The corresponding 32-bit scalings are listed in chapter
Additional parameter data
(page
273
).
Other
The value is taken from another parameter.
Choosing “Other” displays a parameter list in which the user
can specify the source parameter.
Other [bit]
The value is taken from a specific bit in another parameter.
Choosing “Other” displays a parameter list in which the user
can specify the source parameter and bit.
Parameter
Either a user-adjustable operating instruction for the drive,
or an
Actual signal
.
p.u.
Per unit
[parameter number]
Value of the parameter