ABB ACQ80, Firmware Manual

Page: 248 / 390

248 Parameters
95.26 Motor disconnect
switch
Enables the use of the motor disconnect switch.
When enabled, the drive does not trip to a fault
when it detects the disconnection but remains
operational and returns to normal operation
after a reconnection.
When this parameter is enabled, the drive will go
through the following sequence:
1. Motor is disconnected: Drive detects the
disconnection and indicates it with warning
A784
. The drive remains in operation and waits
for motor reconnection.
2. Motor is reconnected: Drive detects the
reconnection, removes the warning and returns
to normal operation. The last active reference
before the disconnection is in use.
Note: This feature is only available in scalar
mode. This parameter does not affect vector
mode behavior.
Disable
Disable Motor disconnect switch disabled. 0
Enable Motor disconnect switch enabled. 1
95.200 Cooling fan
mode
Selects the fan control type. The fan control
functionality enables heat dissipation from the
drive and avoids dust accumulation in the drive.
Auto
Auto Controls the fan automatically according to the
temperature changes of the drive.
0
Always on Fan runs continuously with the maximum speed
(50Hz). 1
96
96 System
Language selection; access levels; macro
selection; parameter save and restore; control
unit reboot; user parameter sets; unit selection.
96.01 Language
Selects the language of the parameter interface
and other displayed information when viewed on
the control panel.
Notes :
• Not all languages listed below are necessarily
supported.
• This parameter does not affect the languages
visible in the Drive composer PC tool. (Those
are specified under
View – Settings – Drive
default language .)
Not
selected
Not selected None. 0
English English. 1033
Italiano Italian. 1040
No. Name/Value Description Def/
FbEq16