ABB ACQ80, Firmware Manual

Page: 188 / 390

188 Parameters
36.13 PVL current at
peak
Shows the Motor current at the moment the peak
value was recorded. 0.00 A
-32768.00…
32767.00 A
Motor current at peak. 1 = 1 A
36.14 PVL DC voltage
at peak
Shows the voltage in the intermediate DC circuit
of the drive at the moment the peak value was
recorded.
0.00 V
0.00…
2000.00 V DC voltage at peak. 10 = 1 V
36.15 PVL speed at
peak
Shows the Motor speed at the moment the peak
value was recorded. 0.00 rpm
-30000…
30000 rpm
Motor speed at peak. See par.
46.01
36.16 PVL reset date
Shows the date on which the peak value logger
was last reset.
01/01/
1980
1/1/1980...6/5/
2159 Last reset date of the peak value logger. -
36.17 PVL reset time
Shows the time when the peak value logger was
last reset. 00:00:00
- Last reset time of the peak value logger. -
36.20 AL1 0 to 10%
Shows the percentage of samples recorded by
amplitude logger 1 that fall between 0 and 10%.
100% corresponds to the
I
max
value given in the
ratings table in chapter Technical data in the
hardware manual.
0.00%
0.00…100.00% Amplitude logger 1 samples between 0 and 10%. 1 = 1%
36.21 AL1 10 to 20%
Shows the percentage of samples recorded by
amplitude logger 1 that fall between 10 and 20%. 0.00%
0.00…100.00% Amplitude logger 1 samples between 10 and 20%. 1 = 1%
36.22 AL1 20 to 30%
Shows the percentage of samples recorded by
amplitude logger 1 that fall between 20 and 30%. 0.00%
0.00…100.00% Amplitude logger 1 samples between 20 and
30%. 1 = 1%
36.23 AL1 30 to 40%
Shows the percentage of samples recorded by
amplitude logger 1 that fall between 30 and 40%. 0.00%
0.00…100.00% Amplitude logger 1 samples between 30 and
40%. 1 = 1%
36.24 AL1 40 to 50%
Shows the percentage of samples recorded by
amplitude logger 1 that fall between 40 and 50%.
0.00%
0.00…100.00% Amplitude logger 1 samples between 40 and
50%.
1 = 1%
No. Name/Value Description Def/
FbEq16