Fault tracing 311
A5EA Measurement
circuit
temperature
Problem with internal
temperature
measurement of the
drive.
Contact your local ABB
representative.
A5EB PU board
powerfail
Power unit power supply
failure.
Contact your local ABB
representative.
A5ED Measurement
circuit ADC
Measurement circuit
fault.
Contact your local ABB
representative.
A5EE Measurement
circuit DFF
Measurement circuit
fault.
Contact your local ABB
representative.
A5EF PU state feedback State feedback from
output phases does not
match control signals.
Contact your local ABB
representative.
A5F0 Charging
feedback
Charging feedback signal
missing.
Check the feedback signal
coming from the charging
system.
A5F1
Redundant
measurement
Duplicated
measurements are
beyond limits.
Contact your local ABB
representative.
A5F2 Overtemperature
hw
Excessive hardware
temperature.
Contact your local ABB
representative.
A682 Flash erase speed The flash memory (in the
memory unit) has been
erased too frequently,
compromising the
lifetime of the memory.
Avoid forcing unnecessary
parameter saves by parameter
cyclic parameter writes (such as
user logger
triggering through parameters).
Check the auxiliary code (format
XYYY
YZZZ). “X” specifies the source
of
warning (1: generic flash erase
supervision). “ZZZ” specifies the
flash
subsector number that
generated the
warning.
A6A4 Motor nominal
value
The motor parameters
are set incorrectly.
Check the auxiliary code. See
actions for each code below.
The drive is not
dimensioned correctly.
Code
(hex)
Warning / Aux.
code
(
aux code visible
only on assistant
control panel and drive
composer)
Cause
What to do
Summary of Contents for ACQ80
