ABB ACQ80, Firmware Manual

Page: 214 / 390

214 Parameters
51.29 FBA A drive type
code
Shows drive type code in the fieldbus adapter
module mapping file (stored in the memory of
the drive).
This parameter is read-only.
-
0…65535 Drive type code stored in the mapping file. 1 = 1
51.30 FBA A mapping
file ver
Shows fieldbus adapter module mapping file
revision stored in the memory of the drive in
decimal format.
This parameter is read-only.
-
0…65535 Mapping file revision. 1 = 1
51.31 D2FBA A comm
status
Shows status of the fieldbus adapter module
communication.
Note : After the fieldbus adapter detects a
communication loss, it will wait for a time delay
before changing this communication status
parameter to off-line. If this time delay exists for
an FBA module, then it will be in module specific
section. See parameters
51.02
...
51.26
for more
information.
Not
configured
Not configured Adapter is not configured. 0
Initializing Adapter is initializing. 1
Time out A timeout has occurred in the communication
between the adapter and the drive. 2
Configuration
error Adapter configuration error: mapping file not
found in the file system of the drive, or mapping
file upload has failed more than three times. 3
Off-line Fieldbus communication is off-line. 4
On-line Fieldbus communication is on-line, or fieldbus
adapter has been configured not to detect a
communication break. For more information, see
the documentation of the fieldbus adapter.
5
Reset Adapter is performing a hardware reset. 6
51.32 FBA A comm SW
ver
Shows common program revision of the adapter
module in format axyz, where a = major revision
number, xy = minor revision number,
z = correction number or letter.
Example: 190A = revision 1.90A.
0x0000
0x0000...0xffff Common program revision of adapter module. -
No. Name/Value Description Def/
FbEq16