Zoomlion ZCC1100, Руководство оператора, Страница: 79 / 291

Operator’s Manual for Crawler Crane
D
e
s
c
rip
tio
n
o
f
Cra
n
e
Operator’s Manual for Crawler Crane
ZCC1100H Crawler Crane 2-57
(3) Do not lift a load in the area which is not in the lifting capacity range, otherwise the
crane may topple over or be damaged;
(4) The value in the chart is the lifting capacity when the crane is working with 61740
Lbs (28t) rear counterweight and 22050lbs (10t) central counterweight in 360° range.
(5) The hook on the main boom is nearest to the boom head.
(6) The value in the chart is the maximum lifting capacity of the crane, including the
weight of lifting device, hook, wire rope at the end of hook and so on.
(7) Choose the type of hook on the load moment limiter before the system is switched
to SF-2 configuration.
(8) The crawler carriers of the crane are extended completely.
2.4.6 Lifting capacity in assembly mode
Use the mounting cylinder on the boom to lift a load during crane self-assembly and
dismantling operation. The lifting capacity chart is shown in the table 2-18.
Table 2-18 Lifting capacity chart in assembly mode
Radius ft (m) Main boom angle (°) Lifting capacity kip (t)
7’ (2.15)
84 26.4 (12)
8’2” (2.5)
79.6 26.4 (12)
9’10” (3)
73 26.4 (12)
11’5” (3.5)
66 26.4 (12)
13’1” (4)
58.5 24.2 (11)
14’9” (4.5)
50 22 (10)
16’5” (5)
39.8 20.9 (9.5)
18’ (5.5)
24.9 18.7 (8.5)
CAUTION
(1) Do not lift a load in the area which is not in the lifting capacity range, otherwise the
crane may topple over or be damaged.
(2) The crane must stand on firm and flat ground.
(3) The value in the lifting capacity chart is the permissble maximum lifting capacity of
the crane, which is determined by the stength of the crane.
(4) The value in the above chart is the maximum lifting capacity of the cylinder,
including the weight of lifting device, cylinder and so on.
For reference only.
Operators manual should be consulted and adhered to.