Zoomlion ZCC1100, Руководство оператора, Страница: 109 / 291

履带起重机操作手册
安
全
准
则
Operator’s Manual for Crawler Crane
Operator’s Manual for Crawler Crane
Sa
fe
ty
G
u
id
e
lin
e
s
ZCC1100H Crawler Crane 3-27
CAUTION
(1) Never stand directly underneath a lifted load. Observe the instruction “No person is
allowed to stand under the boom when the
crane is operated”.
(2) Tail the load by tagline with proper force. Otherwise the crane may topple over.
(3) Never wrap the tagline around your body or limbs.
3.3.7 Load center of gravity
a) The center of gravity
The center of gravity of an object is the point at which the weight of the object acts as
though it were concentrated.
All loads to be lifted must be equipped with lifting device and rigging above the center of
gravity in order to prevent tipping and possible hazards to equipment and workers. The
lifting force must always be located above the center of gravity. Exert a straight vertical pull
to prevent swinging of the load. In all crane lifts, the center of gravity must remain below
the hook and below the point of attachment for any rigging.
A center of gravity above the hook is unstable and will cause the load to flip as the load will
attempt to
‘find’ the center of gravity during lifting process. Similarly, loads which are not
balanced horizontally can slip from the rigging.
The overall stability of the load is a combination of balance with respect to center of gravity,
distribution of weight, and proper rigging practices.
b) To determine the center of gravity
The center of gravity of a regularly shaped object may be estimated accurately by
determining its approximate center.
Finding the center of gravity of irregularly-shaped objects can be more difficult, but it is
necessary. A load will always hang from its attachment point through the center of gravity.
It is important to visualize this before making a lift.
For reference only.
Operators manual should be consulted and adhered to.