Zoomlion ZCC1100 Скачать руководство пользователя страница 182

Страница: 182 / 291

Operator’s Manual for Crawler Crane

Crane

Operation

4-42

4.5.4 Setting of work mode

For detailed steps of setting work mode, please see

Load Moment Limiter Operating

Manual

CAUTION

Set correct work mode in load moment limiter in accordance with actual conditions.

Setting of work mode will affect the winch by the control system, otherwise accidents

may occur.

4.5.5 Operation of travel gear

4.5.5.1 Components of travel gear

The travel gear comprises drive sprocket, driven sprocket, track-carrier roller, track roller and

track pad, crawler carrier as well as traveling reducer. Both right crawler carrier and left crawler

carrier are fitted with an independent traveling reducer. The hydraulic oil in traveling motor is

supplied by superstructure main pump through main valve and central revolving joint.

Figure 4-38

Components of travel gear

4.5.5.2 Operation of travel gear

The traveling movements are controlled by left and right travel gear pedals (No. 10, 11 in the

figure 4-1). The movements “left crawler forwards” and “left crawler backwards” are controlled

by left travel gear pedal, and the movements “right crawler forwards” and “right crawler

backwards” are controlled by right travel gear pedal. In a word, the crane can carry out such

movements as traveling straight ahead/backwards, steering during traveling and turning on

spot.

a) Traveling on level road

Traveling straight ahead: Depress two travel gear pedals forwards at the same time

Traveling straight backwards: Depress two travel gear pedals downwards at the same time

Turning to left with a crawler: Depress right travel gear pedal forwards

Turning to right with a crawler: Depress left travel gear pedal forwards

Drive sprocket Track carrier

roller

Driven sprocket

Track roller

Track pad

For reference only.

Operators manual should be consulted and adhered to.

Содержание ZCC1100




































































































































































































































































































Результаты поиска

Содержание ZCC1100

Отзывы:

Zoomlion ZCC1100, Руководство оператора, Страница: 182 / 291

Результаты поиска

Содержание ZCC1100

Отзывы: