Zoomlion ZCC1100, Руководство оператора, Страница: 216 / 291

Operator’s Manual for Crawler Crane
Assembly
and
Dismantli
ng
5-10
5.2.2 Self-assembly and dismantling of crawler carrier (optional)
5.2.2.1 Components of crawler carrier self-assembly and dismantling
mechanism
Crawler carrier self-assembly and dismantling mechanism consists of mounting cylinder, main
boom pivot section, main boom tilting-back support, support cylinder, derricking mechanism
and so on. See the figure 5-8 and table 5-1.
2
3
4
1
Figure 5-8 Preparation for crawler carrier self-assembly
Table 5-1 Parts used for crawler carrier self-assembly
No. Names of the parts No. Names of the parts
1 Main boom tilting-back support 3 Mounting cylinder
2 Main boom pivot section 4 Support cylinder
After basic machine is unloaded from the low-loader via support cylinders, A-frame must be
erected to required position for the preparation of crawler carrier self-assembly. The operation
of erecting A-frame refers to “Unloading of crane with crawler carrier” mentioned above. During
crane self-assembly, the self-assembly & dismantling mode must be selected on the load
moment limiter.
The support cylinders used for crane self-assembly are optional, and they are subject to the
contract.
DANGER
(1) Before crane self-assembly, check if basic machine is level via inclinometer which
is near the undercarriage control levers. If the basic machine is not level, adjust the
support cylinders.
For reference only.
Operators manual should be consulted and adhered to.