Zoomlion ZCC1100, Руководство оператора, Страница: 260 / 291

Operator’s Manual for Crawler Crane
Assembly
and
Dismantli
ng
5-54
No.
Names of the
components
Illustration
7 Double anchoring rod
11
.8
’’(
30
0m
m
)
Ø1.38’’(35mm)
Ø1.57’’(40mm)
0.71’’(18mm)
1.34’’(34mm)
8 Pin spindle
Ø1.57’’(40mm)
2.
75
’’(
70
m
m
)
CAUTION
The component numbers of anchoring rods mentioned in “Figure 5-48 Combination of
fixed jib front anchoring rods” are consistent with those in the above table, so the
components of anchoring rods can be found by referring to the component numbers
during assembling.
Principle for determining the length of fixed jib front anchoring rods:
When fixed jib is 19'8" (6m) long, the length of fixed jib front anchoring rods must be 22'1.367"
(6740mm).
When fixed jib length increases by 19'8" (6m), a 18'10.783" (5760mm) anchoring rod (part 9)
must be added accordingly. The diameter of pin spindle is 1.575" (40mm).
Combination of fixed jib front anchoring rods in “Main boom with fixed jib” configuration is
shown in the following figure:
For reference only.
Operators manual should be consulted and adhered to.