Zontes ZT250-R, Руководство по обслуживанию

Страница: 71 / 76

11-CUSHION COMPONENT
70
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1204100-006000 ZT250-R Cushion 1 one set
2 1244100-024000 ZT250-R Cushion front rubber 2
3 1244100-022000 ZT250-R Cushion rubber 2
4 1244100-025000 ZT250-R Cushion circle rubber 4
FIG.1 CUSHION
COMPONENT
Cushion component
PROCEDURE:
●
Seperate cushion
Insert the key in the "OFF" position ,counterclockwise until the sound indicates that the cushion lock is open.
Tap the back of the cushion if there is no sound.
Hold the rear cushion in the direction of the arrowhead, while remove the cushion from left and right swing
cushion.
●
Install cushion
When assembling the cushion, first check whether all the cushion glue is complete, insert the front of the
cushion first, and then make a hard clap at the end of the cushion,,when heard "kaca",the cushion lock is in
place.
●
Cushion rubber,lock plate component for individual sales
If the cushion glue is worn or the cushion lock damaged too much, you can buy the genuine article on the
website.
The corresponding installation location is shown in the lower left image.
CAUTION:
●
The motorcycle should be fixed and then operated.
●
The cushion contains all the cushion glue and lock pieces and bolts.
●
It is easy to be surprised when the cushion is not in place.
for after-sale