Zontes ZT250-R, Руководство по обслуживанию

Страница: 49 / 76

7-FRONT FORK COMPONENT 48
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1174100-009000 ZT250
－
S LED Front light 1
2 1251300-063093 Plywood M6×11×15
（
environmental color
）
5
3 1251200-033093 Non
－
standard self
－
tapping bolt ST4.2×12(color zinc ) 2
4044100-007036 ZT250
－
S head cover lower part (electroplated bright
gray highlight)
4044100-007021 ZT250
－
S head cover lower part (special black)
black
1 4
PROCEDURE:
●
Front light
Remove the bolt(3) with the hexagonal tool.
Separate the front light
⑴
and head cover lower part
⑷
.
Separately remove the plywood nut(2) from the front light(1) and the lower part of the head cover(4).
●
Adjust the light height
The driver sits on the seat and the motorcycle is upright. The other person uses a cross screwdriver to insert the
left or right side of the motorcycle into the zigzag position indicated by the arrows on the left. Rotate the light
level adjustment bolt
①
clockwise or counterclockwise to adjust the light to a suitable position. No need to
remove any parts to adjust light height.
CAUTION:
●
Attention should be paid when using the tool to press down the buckle. If the force is too large, the buckle will
be easily broken.
●
When restoring the bolt(3), the axis of the bolt should be perpendicular to the mounting surface of the light
barrier, and do not overtighten the pin on the upper part of the head cover.
●
The front light use LED light source, which does not need to be replaced or maintained under normal
condition. Therefore, the rubber sleeve behind the front light cannot be removed to prevent dust from entering
Front light assembly
FIG.13 FRONT FORK
COMPONENT