Zontes ZT250-R, Руководство по обслуживанию

Страница: 57 / 76

7-FRONT FORK COMPONENT 56
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1194100-002000 ZT250-S Right rearview mirror 1
2 1100300-044000
ZT125T front disc main pump assembly(without rocker arm)
1
3 1134100-032000 ZT250-R Right handle rocker arm (Machine) 1
1184100-105000 Stop selling
1184200-153000
ZT310
－
R vice switch of right handle bar
ZT310
－
R Second Generation Right Handlebar Switch (LCD)
5 1250205-031091 GB70.1M6×30(stainless steel) 2
6 1251100-102000 Non-standard bolt M6×16 (304 stainless steel) 2
7 1274100-007000 ZT250-S Flanged Bushing (φ6.4×φ9×6
＋
φ20×2) 2
8 1244100-004000 ZT250-S Flanged Bushing Buffer 2
9 4024100-020000 ZT250-R ABS mounting bracket 1
10 1224200-003000 ZT310-Z Rear disc brake oil clamp 1
11 1224100-044000 Wheel speed sensor clamp 3
12 1251300-050000 ZT310-Z Chain adjuster nut M10 (304 stainless steel) 1
13 1251100-105000
ZT310
－
Z chain adjuster bolt M10×70 (304 stainless steel)
1
14 1094100-032000 ZT250-R Rear wheel hollow shaft 1
15 1251300-067000 ZT250-R Rear wheel hollow shaft nut 1 110N.m
16 1274100-072000 ZT310 Right adjuster 1
17 1184200-045000 DF30 wheel speed sensor 1
18 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 1
PROCEDURE:
●
Front disc brake main pump assembly
Referring to the steps of "Right Handle Assembly" and "Adding Brake Fluid, Rocker Adjustment", remove the rearview
mirror(1), the front brake main pump(2), the rocker arm(3), the half cover(4), and the bolt(5). Remove the tube.
●
ABS mounting bracket assembly
Remove the bolt(6), bushing(7), bracket(9) and ABS control unit
⑤
with the hexagonal tool; remove the buffer(8) from
the bracket.
●
ABS rear assembly
Remove the clip(11); pull the tubing from the clip(10); remove the bolt(18) with the hexagonal tool and pull the wheel
speed sensor(17) out from the rear caliper.
Refer to the steps of the "rear wheel assembly" in the rear and rear trim assembly. Turn the nut(12) and bolt(13) forward
and remove the hollow shaft nut(15). Hold the rear wheel assembly with one hand and tap the hollow end of the hollow
shaft(14) with a rubber hammer to retract the hollow shaft until the caliper can be removed.
CAUTION:
●
Because of the special nature of the brake system, it is not recommended to dismantle and repair it by yourself; be sure to
give it to a qualified repair center.
1
FIG.21 FRONT FORK
COMPONENT
ABS braking system-3
4