Zontes ZT250-R, Руководство по обслуживанию

Страница: 51 / 76

7-FRONT FORK COMPONENT 50
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1194100-001000 ZT250-S Left rearview mirror 1
2 1134100-034000 Left handle rocker arm(without switch/adjusting screw) 1
1184200-132000 ZT310
－
R Left Handle Sub Switch (No ABS)
Stop selling
Old 1184200-152000
ZT310
－
R Second Generation Left Handlebar Switch (LCD)
4 1250205-031091 GB70.1M6×30(stainless steel) 2
5 1184200-141000 ZT310
－
X1 Left Handle Switch
1
6 1244100-041000 ZT250-R Left hand rubber sleeve 1
7 1134200-023000 ZT250-R Balancing block 1
8 1134100-031000 ZT250-R Left handle rocker (Machine) 1
9 1244100-096000 ZT250
－
R protective rubber sleeve 1
10 1251100-198000 Non-standard bolt M6×13
－
φ8×20
1
New 11 1251300-073000 GB/T6185 nut M6 1
12 1184200-170000 ZT310-V Clutch switch 1
13 1250201-039000 GB818 cross recessed pan head screw M4×12(color zinc)
1
FIG.15 FRONT FORK
COMPONENT
Left handle assembly
3 1
PROCEDURE:
●
L eft assistant switch
Locate and unplug the left auxiliary switch cord plug. Fix the left-hand rocker arm seat
⑵
with one hand, remove the bolt
⑷
with a
hexagonal tool with the other hand, and remove the left auxiliary switch
⑶
.
●
L eft rear view mirror, left switch, rocker arm
Remove the clutch line by referring to the “Replace Clutch Line” procedure.. Remove the left rear view mirror
⑴
,rocker base
⑵
,left switch
⑸
, and rocker arm
⑻
by referring to the steps in "Right Handle Assembly" and "Add Brake Fluid, Adjusting Rocker Arm".
●
Left hand rubber sleeve and balance block assembly
Can be soaked in hot water for about 10 minutes before use a dust blower
①
to blow the left hand grip between the rubber sleeve
⑹
and
move the rubber sleeve inwards until the counterweight positioning hole is exposed. Press the convex parts at the two ends of the weight on
the balance weight inward and pull out the balance weight assembly at the same time(7). Use a dust blower
①
to inject the left sleeve of the
rubber sleeve(
⑹
and the direction of the handle .And move it outward to remove the rubber sleeve(6).
●
Replace the left hand rocker arm and clutch switch
Fix the bolt
⑽
with a hexagonal tool, then remove the nut
⑾
with a sleeve or a wrench, remove the bolt
⑽
and then remove the left hand
rocker arm
⑻
. First unplug the clutch switch, then remove the bolt
⒀
with a Phillips screwdriver and remove the clutch switch
⑿
. The
rotation adjustment nut can adjust the distance between the rocker arm and the left hand rubber sleeve to adapt to the feel of different
drivers.
CAUTION:
●
Press during reassembly: the left hand grip rubber sleeve - balance block - switch - left hand rocker arm - left rear view mirror.
●
Note the triangle symbol on the rocker arm assembly and the assistant switch seam alignment switch.
●
From mid-July 2019, the old hand switch will be switched to the new one. Production of the old model will be discontinued in the future;
the old switch can be directly replaced with the new one.
●
The second-generation deputy switch is equipped with a large magneto version of the motorcycle. The old motorcycle can be replaced by
the second-generation deputy switch.