Zontes ZT250-R, Руководство по обслуживанию

Страница: 36 / 76

6- RADIATOR SYSTEM COMPONENT
35
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1251100-101000 Non-standard bolt M6×12 (304 stainless steel) 2
2 1274100-018000 ZT250-S Muffler anti-hot plate bushing 2
3 1244100-017000 ZT250-S Muffler anti-hot plate buffer 2
4 4044101-004036 ZT250
－
R oil cooler left decorative cover (dark gray)
1
5 1251100-102000 Non-standard bolt M6×16 (304 stainless steel) 4
6 1051453-001000 9.8×2.2 Acrylate rubber O-shape ring 3
7 1244100-068000 ZT250-R Oil cooler inlet pipe 1
8 4044101-005036 ZT250
－
R oil cooler right decorative cover (dark gray)
1
9 1244100-069000 ZT250-R Oil cooler outlet pipe 1
10 1274100-084000 ZT250-R Oil cooler 1
FIG.4 RADIATOR
SYSTEM COMPONENT
Radiator component-2
PROCEDURE:
●
Oil cooler trim cover
Remove the bolt(1) with the hexagonal tool; remove the left trim cover(4) and the right trim cover(8). Push the
bushing(2) out of the buffer(3) and remove the buffer from the trim cover
●
Oil cooler inlet pipe
Remove the bolt(5) with the hexagonal tool, separate the oil inlet pipe(7) from the oil cooler(10), and remove
the O-shape rings(6) at both ends.
●
Oil cooler outlet pipe
Remove the bolt(5) with the hexagonal tool, separate the oil outlet pipe(9) from the oil cooler(10), and then
remove the O-shape ring(6).
CAUTION:
●
It is forbidden to disassemble the heat dissipation system when it is warmed up. Wait for the engine and
muffler to cool completely before disassembling.
●
The waste oil needs to be recycled and handed over to a qualified organization; it is forbidden to dump the
polluted environment or water at will.
●
When disassembling the oil cooler inlet pipe, violent operation is strictly prohibited to avoid deformation of the
liner.
●
It is recommended to replace oil drain bolts, combination seal gasket, and O-shape ring to prevent oil leakage
every time you change the oil.