Zontes ZT250-R, Руководство по обслуживанию

Страница: 28 / 76

5-PEDAL COMPONENT 27
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1250301-018093 GB6170M6
－
LH (environmental color)
1
2 1274100-096000 ZT250
－
R shift lever adjustment screw
1
3 1274200-160000 ZT310
－
T shift lever step rocker
1
4 1250301-020093 GB6170M6 (environmental color) 1
5 1250104-016093 GB16674M6×28 (chroming) 1
6 1274100-039000 ZT250
－
S shift lever spline rocker arm
1
7 1250303-010093 GB6177.1M6 (environmental color) 1
8 1274100-094000 ZT250
－
R brake pedal
1
9 1274200-059000 ZT310
－
X front right footrest
1
FIG.1 PEDAL
COMPONENT
Pedal height adjustment
PROCEDURE:
●
Shift lever height adjustment
With open end wrench nut (1), nut (4), respectively, in the direction of the arrow to loosen, turn adjusting screw
with 8 # open end wrench on the groove position adjustment to the appropriate height, then lock nut (1), nut (4).
If above method suitable position once the nut, bolt
⑸
and
⑺
can be removed, use a screwdriver to spline radial
⑹
the middle slot open slightly pull out at the same time, transferred to the appropriate height after assembly, pay
attention to align the middle of the spline grooves.
●
Brake pedal height adjustment
With open end wrench nut (2) in the direction of the arrow to loosen, turn adjusting screw (1) to being stamped
on the brake pedal
⑻
position control and the top of the foot
⑼
'levies below 50 to 55 mm. The adjusting screw
(1) fixed lock nut (2) again.
CAUTION:
●
The motorcycle should be supported in the adjustment process to prevent accidental damage.
●
The lever height of the shift lever should be reasonable, otherwise it will affect the driving experience.
●
The brake pedal height should be reasonable, otherwise the brake disc and the brake disc will always have
friction to affect the service life, which may lead to brake failure.