Zontes ZT250-R, Руководство по обслуживанию

Страница: 34 / 76

6- RADIATOR SYSTEM COMPONENT
33
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1051453-001000 9.8×2.2 Acrylate rubber o
－
rings
1
2 1244100-071000 ZT250
－
R Frame bypass oil pipe 1
3 1251100-061093 M6×22 Hex flang thread bolt 2
4 1251100-089094 Oil bolt M14×1.50×32
（
environmental zinc
）
1
5 1244100-034000 Combination seal gasketφ14×φ20×2 2
PROCEDURE:
●
Frame bypass oil pipe
Remove oil bolt (4) and combination seal gasket (5) with sleeve.
Remove the bolt (3) near the engine with a sleeve. Then remove the frame bypass tube, and finally remove the
O-shape ring (1).
Remove the bolt (3) near the muffler elbow upward side with a sleeve. If you do not need to remove the heat
dissipation assembly, do not remove the bolt.
CAUTION:
●
It is forbidden to disassemble the heat dissipation system when it is warmed up. Wait for the engine and
muffler to cool completely before disassembling.
●
The waste oil needs to be recycled and handed over to a qualified organization; it is forbidden to dump the
polluted environment or water at will.
●
Violation is strictly prohibited when removing the bypass pipe from the frame so as to avoid deformation of
the sleeve.
●
It is recommended to replace oil drain bolts, combination seal gasket, and O-shape ring to prevent oil leakage
every time you change the oil.
FIG.2 RADIATOR
SYSTEM COMPONENT
The oil pipe near the frame