Zontes ZT250-R, Руководство по обслуживанию

Страница: 67 / 76

10-REAR COVER COMPONENT 66
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1224100-054000 ZT250
－
R electric component box lower cover
1
2 1244100-078000 ZT250
－
R Electrical device box rear rubber 1
3 1224200-040000 ZT310 Electric parts box lower cover 1
4 1251100-101000 Non
－
standard bolt M6×12 (304 stainless steel)
4
5 1274100-057095
Flanging bushing φ6.2×φ8.5×3.5
＋
φ14×1.5
2
6 1244100-052000
Buffer rubber of flanging bushing (φ8.5×φ14×1)
2
7 1184200-016000 ZT310 PKE Buzzer 1
PROCEDURE
：
●
Electrical component box assembly
Push the buckle in the direction of the arrow to remove the lower cover of the ZT250-R electrical component
box
⑴
and the lower cover of the ZT310 electrical component box
⑶
.
Pull down in the direction of the arrow to remove the back glue of the electrical device box
⑵
.
Remove the bolts
⑷
on the left and right sides of the middle of the electrical device box, and remove the
bushing
⑸
and the rubber pad
⑹
.
Remove the bolts on the left and right sides of the front of the electrical component box.
Find and unplug the buzzer plug, heat it back and forth with a heat gun, and then remove the PKE buzzer
⑺
.
Clean up residual offset printing.
CAUTION:
●
Attention to prevent damage to the buckle when removing the cover of the electrical device box.
●
If you need to replace the PKE fuse, you can directly replace the lower cover
⑶
of the electrical device box to
replace it.
FIG.4 REAR COVER
COMPONENT
Electrical device box cover component