Zontes ZT250-R, Руководство по обслуживанию

Страница: 35 / 76

6- RADIATOR SYSTEM COMPONENT
34
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1244100-034000 Combination seal gasket φ14×φ20×2 2
2 1244100-069000 ZT250
－
R Oil cooler outlet pipe 1
3 1251100-089094 Oil bolt M14×1.50×32
（
environmental color zinc
）
1
4 1251100-061093 M6×22 Hex flang bolt thread level 8.8 (color zinc) 3
5 1244100-068000 ZT250
－
R Oil cooler inlet pipe
1
6 1274100-079000 ZT250
－
R Front disc brake tube bracket 2 1
FIG.3 RADIATOR
SYSTEM COMPONENT
Radiator component-1
PROCEDURE:
●
Oil cooler outlet pipe
Remove the oil bolt (3) with a sleeve and remove the seal gasket (1).
Remove the bolt (4) with a tool.
●
Oil cooler inlet pipe
Remove the bolt (4) with the sleeve and pull the connector of the oil cooler inlet pipe (5) outward in the axial
direction.
●
Heat dissipation assembly
Remove the bolt (4) near the bottom of the heat dissipation with a sleeve; then remove the bolt (4) on the front
of the heat dissipation and remove the tube bracket (6). Remove the heat dissipation assembly.
CAUTION:
●
It is forbidden to disassemble the heat dissipation system when it is warmed up. Wait for the engine and
muffler to cool completely before disassembling.
●
The waste oil needs to be recycled and handed over to a qualified organization; it is forbidden to dump the
polluted environment or water at will.
●
When disassembling the oil cooler inlet pipe, violent operation is strictly prohibited to avoid deformation of the
liner.
●
It is recommended to replace oil drain bolts, combination seal gasket, and O-shape ring to prevent oil leakage
every time you change the oil.