Zontes ZT250-R, Руководство по обслуживанию

Страница: 64 / 76

10-REAR COVER COMPONENT 63
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1144100-001000 ZT250
－
S Rear handrail
1
2 1251100-123093 Non-standard bolt M8×25
（
environmental color
）
4
3 1244100-065000 ZT250-S rear cover left limit rubber 1
4 1250205-040095 GB70.1 inner hex bolt M8×16(color Zinc) 3
5 1274100-075000 ZT250
－
S Rear cover left limit bracket
1
6 1251100-101000 Non
－
standard bolt M6×12 (304 stainless steel)
3
7 1224100-051000 Grade 0 flame retardant tie (black 2.5×100) 2
8 1020241-229000 ZT250
－
R seat cushion lock bracket
1
9 1274100-058000 ZT310 Electric seat lock 1
FIG.1 REAR COVER
COMPONENT
Rear handrail
、
Cushion lock bracket
PROCEDURE:
●
Rear handrail
Remove the bolt (2) with the sleeve and remove the rear handrail (1).
●
Rear cover left limit bracket
Remove the bolt (4) in the upper left figure with the inner hexagon tool.
Remove the left limit bracket (5) and remove the lower limit rubber (3) from the bracket.
●
Cushion lock bracket
Remove the 2 bolts
⑷
, and lift the cushion lock assembly.
Remove the 3 bolts
⑹
, and separate the cushion lock
⑼
from the cushion lock bracket
⑻
Cut or remove the cable tie
⑺
, find and remove the cable connector of the cushion lock
⑼
CAUTION:
●
Make sure the motorcycle is fixed during the process of discomponent.
●
In the process of discomponent, the material should be protected to prevent damage to the paint surface.