Zontes ZT250-R, Руководство по обслуживанию

Страница: 15 / 76

3-INDUCTION SYSTEM COMPONENT
14
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1050954-009000 YH Carbon tank electromagnetic valve 1
2 1251100-101000 Non-standard bolts M6×12
（
304 stainless steel
）
2
3 1250303-010093 GB6177.1M6
（
color zinc
）
1
4 1251300-063093 Plywoord M6×11×15
（
color zinc
）
2
5 1224200-158000 ZT310
－
R Carbon tank II (with fuel pipe)
1
6 1244200-004000 TB41 Throttle valve desorption rubber tubing 1
PROCEDURE:
●
Carbon tank
Clamp the pipe clamp on the exit of the oil and gas separator at the bottom of the tank with pliers and pull out
the tubing. Unplug carbon tank solenoid valve
⑴
with the same method. Remove the bolts with the inner hex
tool
⑵
. Remove thecarbon tank
⑸
from the left side of the frame and remove the plywood nut
⑷
.
●
Desorption tubing
Clamp the pipe clamp on both ends of the desorption tubing,and take the it
⑹
out.
●
Carbon tank electromangnetic valve
Remove the plug of the solenoid valve
⑴
, then remove the nut
⑶
with the sleeve and remove the
electromagnetic valve.
CAUTION:
●
It needs to remove the seat cushion, side cover, oil tank cover, bladdar and so on.
●
Regularly check whether the filter element of the carbon tank and air filter is not ventilated, otherwise it may
cause the oil supply to affect the driving experience.
●
It should be no crimp, entanglement and other phenomena.
●
Add a fuel pipe on March 13,2019 to prevent fuel dropping onto the muffler surface.
FIG.2 INDUCTION
SYSTEM COMPONENT
Carbon Tank component