Zontes ZT250-R, Руководство по обслуживанию

Страница: 18 / 76

4-REAR FORKLIFT COMPONENT 17
CHK
ADJ
NO. PART NO. PART NAME QTY CAUTION
1 1020242-263021 ZT310 rear auxiliary fender aluminum alloy bracket
(home made)
1
2 1251100-102000 Non
－
standard bolt M6×16(304 stainless steel)
5
3 1224200-090000 ZT310 rear auxiliary fender retaining plate 1
4 1250105-137093 GB5789M6×16(color zinc) 4
5 1250501-007093
GB93φ8(color zinc)
5
6 1274100-057095
Flanging bushing φ6.2×φ8.5×3.5
＋
φ14×1.5
5
7 1244100-052000
Buffer rubber of flanging bushing (φ8.5×φ14×1)
5
8 1251100-101000 Non
－
standard bolt M6×12 (304 stainless steel)
8
9 1270300-039000 HJ125
－
6 rear license light bracket
1
10 1250303-010093 GB6177.1M6(color zinc ) 2
11 4024200-102000
ZT310
－
R rear sub
－
plate iron bracket assembly (improved)
1
12 1184100-114000 ZT250
－
R auxiliary fender extension cable
1
13 4024200-036000 ZT310-V rear auxiliary fender iron support rear section 1
14 4024200-101000 ZT310 rear auxiliary fender iron support front section 1
PROCEDURE:
●
Retaining plate
Remove the bolts
⑵
and
⑷
, remove the flange bushing
⑹
the rubber pad
⑺
, and finally remove the retaining
plate
⑶
.
●
Aluminum alloy bracket
Remove the 2 pcs of bolt
⑻
and 3 pcs of
⑷，
then remove 5 pcs of spring washer
⑸
.Separate the aluminum
bracket from the rear auxiliary fender assembly.
●
Back license plate bracket assembly
Remove the bolt
⑻
and nut
⑽
at the license bracket
⑼
and remove the license bracket
⑼
.
●
Rear auxiliary mud plate iron bracket
Hold the rear turn signal assembly, remove the bolt
⑵
, and remove the flange bushing
⑹
and rubber pad
⑺
.
Remove the rear sub-mud iron bracket
⑾
and rear turn signal assembly.
The old one-piece iron bracket has been discontinued, and the integrated iron bracket assembly
⑾
needs to be
replaced. The assembly already contains the front section
⒁
, the rear section
⒀
and 4 bolts
⑻
.
CAUTION:
●
Do not pull the cable hard when removing the sub-mud switch.
●
When reassembling, first check if there is any pressure on the wire to prevent short circuit when tightening the
bolt.
After sales
FIG.2 REAR FORKLIFT
COMPONENT
Rear sub mudguard component 2