Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 202 / 239

ZP3 Fire Control Panel
Maintenance
ZP3 Fire Control Panel Manual
Page 1 - 12 UD1160.M Iss 6 (25/02/2005)
I
M
Reports to display
Menu Path: Maintenance\ Reports to Display
This menu provides a selection of reports to be viewed on the display. Report messages
may be manually or automatically scrolled. The reports that may be viewed are listed below
with a brief description of each report.
Point analogues A real time display is shown per point of analogue values.
Point ID, sensitivity, threshold and condition are also
displayed. Use the scroll feature to view the
next/previous point analogues.
Checksums Two numeric values will be displayed, a calculated and a
stored value. If the values are not equal, data corruption
has occurred.
Zoning This menu generates a report of which points are
allocated to a zone. The zone number and the first point
allocated to the zone is displayed. Use the scroll feature
to display the next/previous point allocated to the zone.
I/O mapping This report displays all the programmed outputs with their
respective programmed configuration details and
associated input triggers. Use the scroll keys to view the
next/previous outputs and left/right arrow keys to view
associated inputs.
Service This menu generates a report of all sensors that require
servicing. A service condition indicates that the sensor
should be cleaned or replaced as soon as possible. Use
the scroll feature to display the next/previous point. The
point displayed may be limited to a date range.
Pre-service This menu generates a report of all sensors that are in a
pre-service condition. A sensor in a pre-service condition
does not need immediate attention. Pre-service reports
allow forward planning by the installer. Use the scroll
feature to display the next/previous point. The points
displayed may be limited to a date range.