Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 153 / 239

ZP3 Fire Control Panel
Peer-to-peer 3 Protocol
ZP3 Fire Control Panel Manual
UD1160.9 Iss 6 (25/02/2005)
Page 9 - 3
I
9
Interpanel support for Remote Diagnostics across the network
Planner may be connected directly to one panel via its RS232 port and then access any
other panel indirectly via the Network. The operator may perform all functions listed below
with the exception of Code Load.
Remote Diagnostics to/from Planner (ZCP3 protocol on RS232 port)
Direct (ZCP3) or Indirect (ZCP3+PP3)
1. Maintenance Flash Load (includes all Disables: point / zone / panel comms).
2. Config Flash Load (includes all setup options)
3. Message Flash Load (includes the custom text for Point and Zone)
4. Analog View
5. Remote Reset / Silence / Accept commands.
6. Code Load (direct/local panel only)
7. Event Archives view
8. LED status view
Note: When the config is loaded, the disables must be loaded also, to keep them tracking
one another. However the disables may be changed without changing the config, as long as
the config’s integrity is ensured.
Planner version 3.0 or higher is required to make use of these new features.
9.5. Panel Filters Set, Store and Send Capability
The panels now have a utility that allows the Network filters of all of the panels in the network
to be set up and then transferred to any or all of the panels in the network via Maestro.