Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 13 / 239

ZP3 Fire Control Panel
System Overview
ZP3 Fire Control Panel Manual
UD1160.1 Iss 6 (25/02/2005)
Page 1 - 1
I
1
1.1 The ZP3 System
1.1.1 Introduction
The ZP3 is a sophisticated intelligent fire detection system, designed for the protection of
both small and large buildings, as well as very large multi-building sites. It uses a modular
design, which allows scalability from single panel systems, through to large multi-panel
networked systems. A range of hardware and software is available which allows purpose-
made applications for all commercial and industrial sites.
ZP3 is an analogue addressable system based upon the Ziton ZP operating system.
It utilizes advanced fire and smoke sensing techniques, with intelligent software, which
accurately recognizes real fires, and provides early warning. Precision algorithms identify
and, in most cases, eliminate false alarms. The location of a fire is accurately identified.
The ZP3 system supports both wired and wireless (radio) sensors, callpoints, and other
devices, providing a high degree of flexibility. A system comprises one or more ZP3 control
panels, connected to fire and smoke sensors, and other equipment to provide all the
necessary functions. Modular hardware includes remote indicator panels, mimic panels,
local and remote inputs and outputs for interfacing to third-party equipment, and interfaces to
computer-based monitoring and building management systems. Highly configurable
software allows virtually any system requirement to be simply programmed as required. The
ZP3 system is suitable for both new buildings and existing installations.
The complete system is actively monitored on a continuous basis, and provides complete
reliability at all times. Self-maintenance and diagnostics are built-in.
ZP3 fire alarm panels are available in 1, 2 and 4 loop versions, supporting up to 508 sensors
per panel. Built-in peer-to-peer networking capability allows up to 100 panels and over
50,800 sensors to be connected together, providing scalability from small to very large
systems.
The complete ZP3 system is designed to comply with those parts of European Standard
EN54, which have been published. When setup in accordance with the appendix E to this
manual ZP3 panels comply with EN54 (parts 2 and 4), and sensors comply with EN54 (parts
5, 7, and 8). Other parts of the system comply with the appropriate parts of relevant National
Standards, such as BS5839.