Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 120 / 239

ZP3 Fire Control Panel
Software Programming
ZP3 Fire Control Panel Manual
Page 6 - 12 UD1160.6 Iss 6 (25/02/2005)
I
6
Points: Individual settings: Edit (continued)
Messages Create or edit identification messages for each point
address. In the "Edit" mode, the panel keyboard keys are
used. Messages can be up to 40 characters in length.
Options are provided to delete messages.
Sounder Create a list of sensors that are fitted with sounder bases
(SAB). A current list is shown, which can be scrolled. To
add a new sensor, enter the point address. To delete a
sounder base entry, use the F1 key.
Detector test Enable or disable the self test function of each sensor.
Enter the point address. The screen indicates whether
the self-test is on or off. To edit a new sensor, enter the
address or scroll.
Smoke alert delay The smoke alert delay is used to provide an initial local
alarm at a detector fitted with a sounder base, without
alerting the panel. This menu option allows this property
to be assigned to individual detectors. The time before
the panel is alarmed is adjustable from 1 - 5 minutes in
the "System config" menu. This function only operates
with ZP732 "Duet" detectors.
Point type This allows the device type at the point address to be
defined i.e; heat sensor, optical smoke sensor, callpoint,
etc. This is an optional field as the panel normally learns
the device type automatically.
AGV Allocation This allows the point addresses which physically exist
between loop isolators to be defined. This is an optional
field as the panel normally learns the addresses
automatically.
Points: Global settings: View
Menu Path: Setup\Points\Global Settings\View
This menu provides a view of the attributes of point addresses on a zonal basis.
Enter a range of zones, for example 1 - 1, or 3 - 5, or "all". Scroll point addresses, the
attributes of each address will be shown as follows:
Sensor sensitivity
AVF (Alarm verification Function) enabled or disabled
Sounder base Attached or not
Detector self-test Enabled or disabled