Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 203 / 239

ZP3 Fire Control Panel
Maintenance
ZP3 Fire Control Panel Manual
UD1160.M Iss 6 (25/02/2005)
Page 1 - 13
I
M
Reports to printer
Menu Path: Maintenance\Reports to printer
This menu provides a selection of reports to be printed. The reports that may be printed are
listed below together with a brief description of each report.
I/O map This menu generates a printout of all I/O mapping
entries.
Points analogues This menu generates a snapshot of all points analogues
at the time of the print report initialisation. Enter an
address range of points to print or accept the default
value (all).
Service reports This menu generates a report of all sensors that require
servicing or are in a pre-service condition. A service
condition indicates that the sensor should be cleaned or
replaced as soon as possible. A sensor in a pre-service
condition does not need immediate attention, but serves
as a warning that the sensor will reach a service
condition in the future.
Zoning This menu generates a printout of which points are
allocated to a zone. The printout shows the zone number
and the points assigned within it.
Checksums Two numeric values will be printed, a calculated value
and a stored value. If the two values are not equal, then
code corruption has occurred.
Stop printer This option cancels any print operation in progress.