Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 17 / 239

ZP3 Fire Control Panel
System Overview
ZP3 Fire Control Panel Manual
UD1160.1 Iss 6 (25/02/2005)
Page 1 - 5
I
1
1.1.3 Standards
The ZP3 panel when setup according to the appendix E to this manual complies with
European Standard EN54 parts 2 and 4, and meets all functional requirements of this
standard. In addition, the ZP3 panel also incorporates many features, which are specified by
EN54-2 as "options with requirements". These are described below.
Common sounders
EN54-2, paragraph 7.8
Two or four fully monitored common sounder circuits for operating sounders on any fire
alarm.
Co-incidence operation
EN54-2, paragraph 7.12
Optional operation whereby an alarm is only registered after response from two sensors in
the same zone. Initiation of a callpoint overrides the coincidence and raises an alarm.
Remote Manned Centre (Fire Alarm)
EN54-2, paragraph 8.9
Monitored fire alarm signal transmitted to a fire brigade, or other manned centre.
Remote Manned Centre (Fault Alarm)
EN54-2, paragraph 7.9
Monitored system fault signal transmitted to a fire brigade, or other manned centre.
Zone Walk Test
EN54-2, paragraph 10.0
One-man test of a zone of sensors/callpoints, or sounders, with full logging and reporting.
Control System Capability
EN54-2, paragraph 7.10
Optional outputs for controlling fire extinguishing systems, or other control functions, such as
shutdown of ventilation systems, closing of fire or smoke-control doors, etc.
Output Delays
EN54-2, paragraph 7.11
Manually selectable delays, available at level 2 access, to provide delays to certain outputs,
such as specific sounders or remote manned centre alarm. This operates in day/night mode.