Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 174 / 239

ZP3 Fire Control Panel
Operators Instructions
ZP3 Fire Control Panel Manual
Page 1 - 14 UD1160.O Iss 6 (25/02/2005)
I
O
1.4.4 LCD Display: Point Screen
The following explains how to read the LCD display when it is switched to the "Point Screen".
This screen is manually accessed by pressing the "View Points" button in order to see the
device which caused an alarm.
Top row: Alarm and device information
1. On the left, the text gives the type of alarm, for example "Fire", "Fault", "Disabled", or
"Info".
2. The word (point) indicates that you are viewing the "Point Screen".
3. The address of the device (or point) is given, e.g. 1127.
4. The type of device, e.g; "Smoke Sensor", "Callpoint", etc.
Second row: Device location
5. The exact location of the device is given on this line.
Third row: Zone details
6. On the left, the zone number for this device is shown.
7. At the end of the line, the time of the alarm is shown. (Optional)
Bottom row: Confirms type of alarm shown
8. The word points to one of the four "common" alarm indicators, showing which type of
alarm is currently being displayed.
9. The figure in brackets indicates the total number of points in alarm
1.4.5 LCD Display: Display Shut Down, Fault LED's on, Buzzer
Sounding
The ZP3 panel is fitted with a Total Loss of Power Alarm feature. This feature is a pre-wired,
independent circuit that turns on the Common Fault and System Fault LED's and sounds a
buzzer in the event of total loss of power. This condition occurs when the mains power has
been lost and the battery has been depleted to the extent that load-shedding has occurred,
resulting in the entire panel being shut down.
HELP
ACCEPT
MUTE
BUZZER
RESET FIRE FAULT DISABLED OTHER
SILENCE
ALARMS
SOUND
ALARMS
MORE
VIEW
POINTS
Zone Number
Alarm Category
Being Viewed
Type of Alarm
Point Message
Total number of
points in alarm
Point Address
Type of Device
Time of Alarm