Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 167 / 239

ZP3 Fire Control Panel
Operators Instructions
ZP3 Fire Control Panel Manual
UD1160.O Iss 6 (25/02/2005)
Page 1 - 7
I
O
1.3.4 Alarm View Buttons
Located below the LCD text display, are four "Alarm View" buttons, directly below the four
"Common Alarm" indicators "Fire", "Fault", "Disabled", and "Other". When an alarm is
received, then the relevant Common Indicator illuminates, and the zonal details will be
immediately displayed on the LCD text screen. Where more than one type of alarm is
present simultaneously, then the highest priority alarm displays automatically. The priority
order is Fire, Fault, Disabled, Other. To view other categories of alarm, press the relevant
button as described below. After viewing lower-priority alarms using the View Alarm buttons,
the system will time-out and automatically return to the current highest priority alarm.
"View Fire Alarms" Button
Because this is the highest priority, a fire alarm will be automatically displayed, by zone, on
the LCD text screen. The top line will indicate "Fire Alarm", and on the bottom line a
"pointer" will be illuminated directly above the common "Fire" indicator. If you have been
viewing other types of alarm (see below), and wish to return to the fire alarm screen, press
the "Fire" button.
"View Fault Alarms" Button
To view any fault alarms in the system (the "Common Fault" indicator will be illuminated),
press the "Fault" button. The top line will indicate "Fault Alarm", and on the bottom line a
"pointer" will be illuminated above the common "Fault" indicator. The alarm will be displayed
by zone.
"View Disabled" Button
To view disabled zones (the "Common Disabled" indicator will be illuminated), press the
"Disabled" button. The top line will indicate "Disabled", and on the bottom line a "pointer" will
be illuminated above the common "Disabled" indicator. The details will be displayed.
"View Other" Button
To view any other alarms in the system, indicated by the "Common Info" indicator
illuminated, press the "Other" button. The top line will indicate "Fault Alarm", and on the
bottom line a "pointer" will be illuminated above the common "Fault" indicator. The alarm will
display by zone or by category.
FIRE FAULT DISABLED
LOCAL ZONES
1
9
17
25
33
41
49
2
10
18
26
34
42
50
3
11
19
27
35
43
4
12
20
28
36
44
5
13
21
29
37
45
6
14
22
30
38
46
7
15
23
31
39
47
8
16
24
32
40
48
ZP3 FIRE ALARM SYSTEM
HELP
MORE
VIEW
POINTS
DISABLED DELAYED PRE-ALM TEST ENABLE
CONTROL
ON
OFF
FAULT ACTIVE POWER ON
SYSTEM NIGHT
ZONE DAY
POINT MORE TIME
SOUNDERS
REMOTE ALARM
RESTORE
DISABLED
ALARMS
ZITON
RESET
SILENCE
ALARMS
SOUND
ALARMS
CONTROL OUTPUTS
ACCEPT
MUTE
BUZZER
OTHER
View Buttons