Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 187 / 239

ZP3 Fire Control Panel
Operators Instructions
ZP3 Fire Control Panel Manual
UD1160.O Iss 6 (25/02/2005)
Page 1 - 27
I
O
1.7 Operator Maintenance
1.7.1 Introduction
The owner of a fire detection system is responsible for ensuring that it is correctly maintained
so that it is in a proper working condition at all times. This will involve arranging for the
system to be checked, tested and serviced as described in this manual.
The maintenance procedures described are Ziton recommendations. There may be
additional requirements or regulations imposed by local authorities. Where this conflict with
the Ziton recommendations then the local authority regulation should be followed.
Regular procedures
The recommended maintenance procedures can be divided into the following categories:
• Daily checks
•
Weekly checks
•
Quarterly services
• Annual services
The daily and weekly checks require no technical knowledge and can often be carried out by
the panel operator, or in-house maintenance staff. It is important for the person carrying out
the testing to be aware of which building functions or remote alarms will be activated by the
system when an alarm occurs.
The quarterly and annual services should be carried out by an authorized Ziton servicing
company, usually under maintenance contract. These services are not the responsibility of
the operator or in-house maintenance technician, and are not covered in this section of the
manual.
Repair of Faults
The system operator and in-house maintenance personnel should have the telephone
number of the outside company contracted for maintenance, so that they can call them if a
major fault develops which is beyond the capability of the in-house people.
Record Keeping
The operator should maintain a logbook at the control panel, into which a record of all
alarms, events, checks, tests, and repairs are entered.