Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 166 / 239

ZP3 Fire Control Panel
Operators Instructions
ZP3 Fire Control Panel Manual
Page 1 - 6 UD1160.O Iss 6 (25/02/2005)
I
O
1.3.3 Zonal Alarm Indicators
In addition to the Common Alarm Indicators, alarms are indicated by means of zonal fire
indicators, and by means of text messages on the LCD text display. The text display also
shows other information.
Zonal Fire Indicators
Zonal fire indicators are red, and are located on the left of the fascia. When an alarm is
received from a sensor, the ZONE indicator illuminates to identify which zone has initiated
the alarm. This immediately identifies where the fire is. The zone indicator flashes for a new
alarm, and becomes steady after an alarm has been "accepted". It is possible to view at a
glance, the number of zones, which are in an alarm condition, and to identify which are new
alarms, and which have been previously "accepted". Zone indicators are normally off.
LCD Text Display
The LCD text display automatically indicates an alarm with a text message, which identifies
exactly by description the zone in which the alarm occurred, enabling the operator to
accurately direct efforts to the correct location. The LCD text display shows two alarms
simultaneously. When more than two alarms are present at the same time, they can be
scrolled using the up/down scroll keys. An indicator illuminates to indicate that more alarms
exist than are visible on the screen. The LCD display can be used for other functions, which
are described later.
1
9
17
25
33
41
49
2
10
18
26
34
42
50
3
11
19
27
35
43
4
12
20
28
36
44
5
13
21
29
37
45
6
14
22
30
38
46
7
15
23
31
39
47
8
16
24
32
40
48
LOCAL ZONES
ZP3 FIRE ALARM SYSTEM
HELP
MORE
VIEW
POINTS
DISABLED DELAYED PRE-ALM TEST ENABLE
CONTROL
ON
OFF
FAULT ACTIVE POWER ON
SYSTEM NIGHT
ZONE DAY
POINT MORE TIME
SOUNDERS
REMOTE ALARM
RESTORE
DISABLED
ALARMS
RESET FIRE FAULT DISABLED
SILENCE
ALARMS
SOUND
ALARMS
CONTROL OUTPUTS
ACCEPT
MUTE
BUZZER
OTHER
Zone Fire Indicator