Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 179 / 239

ZP3 Fire Control Panel
Operators Instructions
ZP3 Fire Control Panel Manual
UD1160.O Iss 6 (25/02/2005)
Page 1 - 19
I
O
1.5.4 Other Alarms
Alarms, which are not categorized as fires, faults, or disablements are shown as OTHER
alarms, and will display on the panel as, described below. The actions carried out upon
receipt of one of these alarms will depend upon the nature of the alarm, and upon the
procedures at the organization where the system is installed. The following are generic
guidelines only.
Annunciation and Alarm
Common "Other" LED's: Illuminated.
Text display: Zone screen-showing details of zone or category with the
alarm, and give a general description of the event.
Panel Buzzer: Sounding continuously.
Building Sounders: Usually not sounding, depending upon your system
configuration.
Auxiliary Functions: Those functions configured to operate will be active, such
as advising the remote manned centre, calling
maintenance staff, etc.
Status Indicators: Will be illuminated to indicate the category of alarm. In
addition, the LED's will indicate which functions have
been activated, such as advising the remote manned
centre, etc.
Delayed Functions: Certain functions programmed to operate as a result of
the alarm might be configured as a delayed operation.
These could be remote centre alarms, or control
functions. If a function has been triggered to operate
after a delay, then the "delayed" LED on the status
indicator will illuminate.