Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 126 / 239

ZP3 Fire Control Panel
Software Programming
ZP3 Fire Control Panel Manual
Page 6 - 18 UD1160.6 Iss 6 (25/02/2005)
I
6
Control k/switch This function causes the Controls Enable/Disable
keyswitch to be linked to the level 2 access code, allow to
be used for level 2 access.
Planner
Menu path: Setup\Planner
Most of the programming of a ZP3 system is done by means of software. This can be done
directly via the panel menu's, or it can be done off-line on a PC, using Ziton Planner
software, and later loaded into the panel by means of a serial data connection. After being
loaded into the panel, minor modifications can be done to the programming, directly via the
panel menu's. In this case, it is possible to load the programming from the panel back to the
PC, for saving to disk, and hard-copy printout and record-keeping. Menu options available
are as follows.
Send map This function is used to send the programmed data that
exists in a ZP3 panel to an external PC.
Receive map This function is used to receive programmed data from a
PC.
Level 4 Operations
Menu path: Setup\Level 4 operations
These are high level operations for use by a senior administrator of the fire system, to carry
out settings which cannot be changed by installation, maintenance, or operation personnel.
Security codes Allows panel access codes to be defined. Four access
levels are provided:
1. Operator
2. Maintenance
3. Setup
4. Level4
In addition, the access system permits (optional) operator
names to be entered. Up to 20 names can be entered,
each with a different 4-digit numeric access code, and
each assigned an access level of 1-4.
Clear: This menu allows all the access codes to be
deleted. The existing level4 code is required for deletion.
A new level4 code is required.
Edit/View: This menu allows for viewing, adding new
codes, and deleting codes. The first operator, code and
access level will be displayed. Scroll to display other
entries. Displayed entries can be deleted. To add an
entry, scroll to the end of the list and enter the required
details.
Print: This option will generate a printed record of all
existing Operator names, codes and levels, to provide a
hard copy record.