Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 177 / 239

ZP3 Fire Control Panel
Operators Instructions
ZP3 Fire Control Panel Manual
UD1160.O Iss 6 (25/02/2005)
Page 1 - 17
I
O
Types of Fault
The panel continuously monitors both itself and all external wiring and devices for out-of-
normal conditions. Faults fall into three categories:
Serious faults: A system fault, which takes the complete system out of
operation, such as a processor failure, requires
immediate action.
Part-system faults: A fault, which takes a small part of the system out of
action, for example a damaged cable, or a mains failure
where the batteries will operate the system for the rest of
the day, needs to be repaired within the same day.
Service reports: A condition, which reports as needing attention, for
example a dirty sensor, does not affect the immediate
operation of the system, and can be attended to at the
next routine service.
Operator Action
Accept the alarm by pressing the "Accept" button. This will silence the panel buzzer, and
cause the flashing alarm indicators to go steady. Do not press the "reset" button.
Call maintenance personnel to rectify the fault. Record the action taken in the logbook.
After the fault has been rectified, press the "reset" button. The system will restore to normal.