Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 16 / 239

ZP3 Fire Control Panel
System Overview
ZP3 Fire Control Panel Manual
Page 1 - 4 UD1160.1 Iss 6 (25/02/2005)
I
1
Accessories and peripherals
In addition to the ZP-loop devices, a range of accessories and peripheral devices is available
to provide all the elements of a complete system. These include remote display panels,
mimic panel drivers, addressable relay output boards, addressable monitored output boards,
addressable input boards, communication ports RS232 and RS485, remote I/O cabinets,
and other equipment.
Day/Night Capability
Day/Night control provides separate programmes for day and night modes. Different sensor
sensitivity, alarm selection, alarm evaluation delays, and fire brigade response can be
configured.
Configuration
An input/output programming facility allows any "cause-and-effect" requirement to be
configured. Each panel can have up to 896 outputs software linked to 2000 inputs in any
arrangement. All functions are 100% field programmable. This programming can be done
directly at the panel, or off-line at a computer. Flash memory retains all programming and
data, even if the panel is powered-down.
Communication and Integration
Multiple communication capability allows the panel to connect to printers, colour graphic
computers, building management systems, remote mimics and text displays, radio pagers,
and other systems. Simple integration into third-party systems is possible.
Peer-to-Peer Networking
The ZP3 peer-to-peer network enables up to 255 standalone systems (verified up to 100
systems) to be integrated to provide system-wide alarm reporting, co-ordinated evacuation,
cause-and-effect functionality, and control, for large systems and multi-building sites. The
maximum number of panels supported by each software version is listed in the table below.
Panel Software Max panels
Version 1 32
Version 2 64
Version 3 255