Ziton ZP3, Установка, эксплуатация и обслуживание

Страница: 122 / 239

ZP3 Fire Control Panel
Software Programming
ZP3 Fire Control Panel Manual
Page 6 - 14 UD1160.6 Iss 6 (25/02/2005)
I
6
Paradigm
Menu Path: Setup\Paradigm
This menu is used to set the properties of Paradigm sensors. These properties define the
performance characteristics of each sensor, and are selected according to the location of the
each sensor, and the type of response required from a fire, as well as the sensors resistance
to false alarms. See the section on "Sensor response settings" for details on how to choose
appropriate settings for each sensor.
View|
Point Profile View the profile assigned to each Paradigm sensor. The
point address of the first Paradigm sensor is displayed,
together with its profile code. Scroll to view the list.
Edit|
Point profile Allocate a profile to each Paradigm sensor. Enter a point
address, and a configuration menu will appear. Two
different profiles can be assigned to each Paradigm
sensor, one for "Day" operation, and one for "Night"
operation.
Clear|
Point profile Restores a Paradigm point address to the default
Paradigm profile.
System configuration: Panel options
Menu Path: Setup\System Configuration|Panel options
The System Configuration menu is used to set the common functions of the panel. The
Panel Options section sets the following global panel functions.
Panel mode Define whether the panel is to operate in "standard" or
"day/night" mode. In standard mode, all functions remain
the same regardless of the time of day. In day/night
mode, functions and alarms operate differently during
day and night hours.
Panel number Each fire panel must be given a unique identity number
between 1-32.
Day/Night times "Day/Night" panels change to night mode each evening
at a preset time. This menu sets the changeover times
for each day of the week.
D/delay override Allows callpoints to be excluded from the "Day delay"
alarm delay period.