Zeiss Crossbeam 350, Инструкция по эксплуатации

Страница: 78 / 126

6 Operation | 6.5 Finding Appropriate Detector Settings ZEISS
6.5 Finding Appropriate Detector Settings
6.5.1 Selecting a Detector
You need to select an appropriate detector depending on the application and the pressure mode.
In addition to the standard SE detector, several optional detectors are available.
For information on special set-up procedures for the detectors, see:
§
Setting up the InLens SE Detector [
}
78]
§
Setting up the SE Detector [
}
79]
§
Setting up the VPSE Detector [
}
80]
§ Setting up the SESI Detector [
}
82]
§
Setting up the aBSD/BSD Detector [
}
83]
§ Setting up the HT BSD Detector
§
Setting up the EsB Detector [
}
81]
§
Setting up the aSTEM/STEM Detector [
}
85]
§
Setting up the CL Detector [
}
88]
1. Select the Imaging tab of the Crossbeam SEM Control panel.
2. Select the detector from the
Signal A drop-
down list.
6.5.2 Setting up the InLens SE Detector
The InLens SE detector collects the SE signal, acquiring mainly information about surface topogra-
phy.
Fig. 30: Silver nanoparticles embedded in zeolite, imaged at 1.5 kV.
78 Instruction Manual ZEISS Crossbeam 350 | en-US | Rev. 3 | 349500-8111-000