![background image](http://html.mh-extra.com/html/zeiss/crossbeam-350/crossbeam-350_instruction-manual_927679077.webp)
ZEISS
6 Operation | 6.4 Working with Different Aperture Configurations and Beam Modes
Info
If you wish to change the installed configuration of your microscope, contact your local ZEISS
service representative.
1. From the
Menu Bar
, select
View > SEM Status
.
à
The
SmartSEM Status
dialog is displayed.
2. In the
Select
tab, click
Anode Aperture Diameter
.
3. Select the
Display
tab.
à
The parameter
Aperture Size
is displayed.
6.4.2 Selecting the Aperture
With a GEMINI I column, you can control the probe current by changing to a different aperture
within the multihole aperture.
In Fisheye mode, only the default aperture can be used.
The default aperture (central aperture / (1) 30 μm Aperture) has the optimum convergence angle
for the primary beam and the best resolution. The default aperture is suitable for most applica-
tions.
Small apertures are suitable for high-resolution imaging or current-sensitive specimens.
A larger aperture generates a larger probe current and is used for applications that require a high
beam brightness, e.g. EDX, or a large depth of field.
Changing to a smaller/larger aperture will reduce/increase the convergence angle accordingly. This
could lead to decrease in resolution.
1. In the Crossbeam SEM Control panel, select the Control tab.
2. In the
Beam
section, select an aperture from the
Aperture
drop-down list.
3. To double the probe current, activate the
High Current
checkbox.
INFO:
High Current
is recommended for large apertures (60 and 120 μm). For small aper-
tures the depth of field increases.
INFO:
High Current
is not available for the standard aperture.
6.4.3 Selecting the Column Mode
With the Gemini column, different column modes are available.
The Normal mode is the standard imaging and analytical mode with a high flexibility for different
applications. Overview mode provides a large field of view.
1. In the Crossbeam SEM Control panel, select the
Control
tab.
2. In the
Column
section, select between:
Normal
and
Overview
Instruction Manual ZEISS Crossbeam 350 | en-US | Rev. 3 | 349500-8111-000
77