YASKAWA Motoman DX200, Руководство по обслуживанию

Страница: 150 / 1166

9 Error
9.1 Error Message
9-14
4 Total check error of record
3130 - Verify error
3140 - Wrong pseudo instruction
3150 * Concurrent I/O record error
1 Format error
2 Ladder program is too long
3 Exceed the range of the data
4 Specification error of channel No.
5 Specification error of relay No.
6 Timer value error
7 Specification error of timer No
3160 - Cannot load illegal system data
3170 * Condition file data error
1 Format error
2 Specified file No. is omitted
3 Specified tool No. is omitted
4 User file is not registered.
3190 * Error in JOB data record
1 Record on the number of position data (NPOS)
is wrong for the format.
2 Record on the user coordinate No. (USER) is
wrong for the format.
3 Record on the tool No. (TOOL) is wrong for the
format.
4 Record on the position data section is wrong for
the format.
5 Record on the robot type of XYZ data (RCONF)
is wrong for the format.
6 Date (DATE) record is wrong for the format.
7 Comment (COMM) record is wrong for the
format.
8 Record on the JOB attribute data (ATTR) is
wrong for the format.
9 Control group (GROUP) record is wrong for the
format.
10 Local variable (LVARS) record is wrong for the
format.
11 JOB argument (JARGS) record is wrong for the
format.
12 Record on the teaching coordinates for relative
job (FRAME) is wrong for the format.
13 Position data coordinates do not match relative
job coordinates.
Error No. Data Error Message Contents